CAD Drafting / Tool DesignSWN504SWN504202006-03-31T13:26:00Z2006-04-24T15:20:00Z2006-04-24T15:20:00Z15082896Ferris State University246339811.6359CAD Drafting / Tool DesignInjection Mold Design/Build Data SheetName:_____Robert Tennant______________________________________________________________Date:___3-27-06_______CDTD Part and Mold #____10095729_______________Delivery: Normal__X_____ Other:____________Part Name:_____Lifter_________________Part Drawing #:___5729_____________________Part CAD File Name:_____Part1____________Material Type/Grade: ___ABS___ Shrinkage Factor: __.06_____ Approximate Mold Size: _8x10x10_ Approx. Mold Weight: _221_______Mold Design Name:____Lifter MoldMold Drawing #___10095729__________________Mold CAD File Name:____Mold2_______________CAD FILES: CAD Database Format:__________________Part Design_X___2D Part Print _____2D__X__3D Solid __X__3D Solid__X__3D Wireframe __X__3D WireframeMACHINE TYPE:Make/Model___cinn-250________________Clamp Tonnage:____250__________________MOLD BASE # and STEEL TYPE:CATALOG # :__108A-13-17_SH:__9.875_STEEL TYPE:_____#1__X__#2_____#3MOLD TYPE:__X__Conventional_____ M.U.D._____Dedicated_____Family__X__2 – Plate_____Stripper Plate_____3 – Plate_____Floating Plate_____Hot Bushing_____Hot Runner CAM ACTUATION:_____Angle Pin_____Spring_____Hyd. Cyl._____Limit Switch_____Other:___________________________CAM RETENTION:_____Spring_____Slide Lock _____Ball Detent_____Other: _________________________EJECTION METHOD:__X__Ejector Pins __X___Lifters_____Ejector Blades _____Unscrewing_____Ejector Sleeves _____Stripper PlateEJECTOR TRAVEL:GATE & RUNNER TYPE:_____Direct Sprue________Recessed_____Sub-Gate_____X_____Full Round__X__Edge_______________TrapezoidGate Size: .030 x .060 x .060 MOLD FEATURES:_____Flush Style K.O. Extension_____Spring Returned K.O._____Ejector Stroke Limitors_____Runner Shut-Off(s)_____Locking Locating Ring (DME#6504)_____Grease Grooved Bushings__X__Pry Slots between Doweled Plates__X__Steel Type &Rc Hardness Stamped_____Jig Ground Ejector Pin Holes___X_Guided Ejection_____Burger “Thin Switch”_____Straight or Conical Interlocks_____Vent Pins &/or Vacuum Lines_____Mechanically Timed Plates_____Early Ejector Returns_____Tapped Thermocouple Well_____Pressure Sensor Slot & PlugCOOLING LOCATION:___X_Cavities _____Top Clamp Plate___X_Cores _____Stripper Plate_____Cams _____Floating Plate PAINT INFORMATION Safety #2COOLING METHOD:_____Cascades _____Bubblers_____Baffles _____Thermal Pins__X__Other:__STD_______________MATERIAL TYPE & HARDNESS:__X__Cavities_____ H-13__RC32____________X_Cores_______ H-13__RC32 ______________Cam Faces___________________________Cam Bodies__________________________Cam Locks___________________________Wear Plates___________________________Gibs_________________________________Stripper Rings_________________________Inserts__________________________FINISH & COATINGS:__X__SPI/SPE # - Cavity:__interior 2__X__SPI/SPE # - Core:_interior 2_____SPI/SPE # - Other:__________Electrolyses Nickel:__________Release Plate:__________Flash Chrome:__________Texture:__________Cavity ID:__________Other Engraving:__________Date Clock:_____STAMP INFORMATION: Part: 5729Mat’l: ABSShrink Rate: .06Designed And Built by: CDTDShut Height: 9.875 Ejection Stroke: 1.312