CAD Drafting / Tool DesignSWN504SWN504202006-04-05T13:55:00Z2006-04-24T13:58:00Z2006-04-24T13:58:00Z15263002Ferris State University257352111.6359CAD Drafting / Tool DesignInjection Mold Design/Build Data SheetName:______SHANE SMITH____________________________________________________________Date:____04/05/06_____CDTD Part and Mold #_____040506_______________Delivery: Normal_________ Other:____X_______Part Name:______BATTERY COVER_________Part Drawing #:_____040506-P3______________Part CAD File Name:_____BATTERY COVER______Material Type/Grade: _PC/ABS__ Shrinkage Factor: __.007 in/in Approximate Mold Size: ___14 x 18 ______ Approx. Mold Weight: ___650 lbs________Mold Design Name:___2 CAVITY LIFTER MOLD__ Mold Drawing #_______040506-M3_______ Mold CAD File Name:____040506-M2___________CAD FILES: CAD Database Format: SOLID EDGE V.18 *.PCF *.PAR *.ASMPart Design__X__2D Part Print _____2D__X__3D Solid __X__3D Solid_____3D Wireframe _____3D WireframeMACHINE TYPE:Make/Model______CINNCINATI 250_______Clamp Tonnage:_____250 TON_____________MOLD BASE # and STEEL TYPE:CATALOG # :__1318-A-7-23__ SH:_9.88__STEEL TYPE:_____#1__X__#2_____#3MAX EJECTOR STROKE: __1.06___MOLD TYPE:__X__Conventional_____ M.U.D._____Dedicated_____Family_____2 – Plate_____Stripper Plate_____3 – Plate_____Floating Plate_____Hot Bushing_____Hot Runner CAM ACTUATION:_____Angle Pin_____Spring_____Hyd. Cyl._____Limit Switch_____Other:___________________________CAM RETENTION:_____Spring_____Slide Lock _____Ball Detent_____Other: _________________________EJECTION METHOD:__X__Ejector Pins ___X__Lifters_____Ejector Blades _____Unscrewing_____Ejector Sleeves _____Stripper PlateEJECTOR TRAVEL:GATE & RUNNER TYPE:_____Direct Sprue________Recessed__X__Sub-Gate_______X___Full Round_____Edge_______________TrapezoidGate Size: MOLD FEATURES:_____Flush Style K.O. Extension_____Spring Returned K.O._____Ejector Stroke Limitors_____Runner Shut-Off(s)_____Locking Locating Ring (DME#6504)_____Grease Grooved Bushings__X__Pry Slots between Doweled Plates_____Steel Type &Rc Hardness Stamped_____Jig Ground Ejector Pin Holes__X__Guided Ejection_____Burger “Thin Switch”__X__Straight or Conical Interlocks_____Vent Pins &/or Vacuum Lines_____Mechanically Timed Plates_____Early Ejector Returns_____Tapped Thermocouple Well_____Pressure Sensor Slot & PlugCOOLING LOCATION:_____Cavities _____Top Clamp Plate_____Cores _____Stripper Plate_____Cams _____Floating Plate PAINT INFORMATION PAINT SAFTEY STRAP #2 YELLOWCOOLING METHOD:_____Cascades _____Bubblers__X__Baffles _____Thermal Pins__X__Other:________________________MATERIAL TYPE & HARDNESS:__X__Cavities_____P-20 30-35 HRC______X__Cores_______P-20 30-35 HRC_________Cam Faces___________________________Cam Bodies__________________________Cam Locks___________________________Wear Plates___________________________Gibs_________________________________Stripper Rings_________________________Inserts__________________________FINISH & COATINGS:_____SPI/SPE # - Cavity:__________SPI/SPE # - Core:__________SPI/SPE # - Other:__________Electrolyses Nickel:__________Release Plate:__________Flash Chrome:__________Texture:__________Cavity ID:__________Other Engraving:__________Date Clock:_____STAMP INFORMATION: 040506-P3 BATTERY COVERPC/ABS .007 in/inDESIGN & BUILT BY CDTDTOTAL LIFTER TRAVEL: .199 LIFTER ANGLE: 10~