CAD Drafting / Tool DesignSWN504SWN504202006-04-24T13:21:00Z2006-04-24T13:21:00Z15273007Ferris State University257352711.6359CAD Drafting / Tool DesignInjection Mold Design/Build Data SheetName:__KYLE KULWICKI_____________________________________________________Date:__3-31-06_____CDTD Part and Mold #__033106-03_______________Delivery: Normal___X_____ Other:____________Part Name:____CARD TOP________________Part Drawing #:___033106-P3_____________Part CAD File Name:__BATTERY COVER_________Material Type/Grade: ___PC____ Shrinkage Factor: ___.006 IN/IN Approximate Mold Size: 10.375 X 13.375 X 15.00 Approx. Mold Weight: 590 LBS____Mold Design Name:__LIFTER MOLDMold Drawing #___033106-M3___________Mold CAD File Name:_1220A-13-23_______________________CAD FILES: CAD Database Format:__INVENTOR.DWF__________Part Design_____2D Part Print _____2D__X___3D Solid ___X__3D Solid_____3D Wireframe _____3D WireframeMACHINE TYPE:Make/Model___CINCINNATI Clamp Tonnage:_______250 TON_________MOLD BASE # and STEEL TYPE:CATALOG # :1220A-13-23 SH:___10.875_STEEL TYPE:_____#1___X__#2_____#3MOLD TYPE:_____Conventional_____ M.U.D._____Dedicated_____Family__X___2 – Plate_____Stripper Plate_____3 – Plate_____Floating Plate_____Hot Bushing_____Hot Runner CAM ACTUATION:_____Angle Pin_____Spring_____Hyd. Cyl._____Limit Switch_____Other:___________________________CAM RETENTION:_____Spring_____Slide Lock _____Ball Detent_____Other: _________________________EJECTION METHOD:___X__Ejector Pins ___X___Lifters_____Ejector Blades _____Unscrewing_____Ejector Sleeves _____Stripper PlateEJECTOR TRAVEL: 1.20 (MAX)GATE & RUNNER TYPE:_____Direct Sprue________Recessed_____Sub-Gate_____X_____Full Round___X__Edge_______________TrapezoidRUNNER SIZE:3/16 FULL ROUND RUNNERGate Size: SEE DETAIL MOLD FEATURES:_____Flush Style K.O. Extension_____Spring Returned K.O._____Ejector Stroke Limitors_____Runner Shut-Off(s)_____Locking Locating Ring (DME#6504)_____Grease Grooved Bushings___X__Pry Slots between Doweled Plates_____Steel Type &Rc Hardness Stamped_____Jig Ground Ejector Pin Holes__X___Guided Ejection_____Burger “Thin Switch”_____Straight or Conical Interlocks_____Vent Pins &/or Vacuum Lines_____Mechanically Timed Plates_____Early Ejector Returns_____Tapped Thermocouple Well_____Pressure Sensor Slot & PlugCOOLING LOCATION:_____Cavities _____Top Clamp Plate_____Cores _____Stripper Plate_____Cams _____Floating Plate PAINT INFORMATION -SAFTY STRAP #2 YELLOW SAFTY PAINTCOOLING METHOD:_____Cascades _____Bubblers_____Baffles _____Thermal Pins__x___Other:________________________MATERIAL TYPE & HARDNESS:__X___Cavities____P20____________________X___Cores________P20____________________Cam Faces___________________________Cam Bodies__________________________Cam Locks___________________________Wear Plates___________________________Gibs_________________________________Stripper Rings_________________________Inserts__________________________FINISH & COATINGS:__X___SPI/SPE # - Cavity:__D3_____X___SPI/SPE # - Core:__B3________SPI/SPE # - Other:__________Electrolyses Nickel:__________Release Plate:__________Flash Chrome:__________Texture:__________Cavity ID:__________Other Engraving:__________Date Clock:_____STAMP INFORMATION: -ALTERD COMPONENTS WITH SAME DETAIL NO. MAY NOT NECEARLY BE THE SAME LENGTH-FERRIS STATE UNIVERSITYCAD DRAFTING TOOL DESIGNTOOL# 033106-M3-ETCH RECYCLE NOTE ONTO THE END OF EJECTOR PIN.